Welcome Sign DXF SVG Designs

[bcarberry]

looking for family named welcome signs?

[Joe Jones]

Are you asking,or offering?

Joe

[bcarberry]

sorry I'm looking for some

[Joe Jones]

Okay. Are you looking for physical signs with specific names on them? Or are you looking for .dxf cut files that YOU can cut on your plasma table? Are you seeking a library of split monogram files that YOU can modify and sell? Don't make me guess!

Where are you located?

Joe

[bcarberry]

yes I'm looking for monogram that I can add names on them

[Joe Jones]

You should pay the modest $20 annual fee for access to the HUGE numbers of files available here.

You can also find these split monogram files in many, many places.Try https://suncatcherstudio.com for files you can play with.

Joe

[bcarberry]

i did pay the annual fee. just trying to narrow all the designs down since im looking for welcome signs

[Joe Jones]

What table do you have? What software are you using? do you have any VECTOR DESIGN software?

Joe

[bcarberry]

Langmuir crossfire pro. using fire control and fushion 360

[Joe Jones]

Show me what you can do with this simple file.

Joe

HEART MONOGRAM SAMPLE.dxf

HEART MONOGRAM SAMPLE JPG.jpg

[acourtjester]

You can find monogram fonts in esty for cheap
https://www.etsy.com/search?q=monogram+ ... zable=true
Use Inkscape for G-code generation, many post here to show how, use search function in upper right to look around have fun

[adbuch]

looking for family named welcome signs?

Welcome to the forum bcarberry! Did you have a particular theme in mind for the welcome signs? Perhaps western, nautical, automotive, gardening, hollidays (Christmas, Easter, etc.) or something else?

Here is one previously posted.

lawn chairs.dxf

[adbuch]

Here is another one from this site.
David

2 - Wren Welcome Signs.dxf

[adbuch]

WelcomeWest.DXF

[adbuch]

Here is a generic version where you could add your own artwork and name.
David

welcome sign add your name and artwork.dxf

[adbuch]

yes I'm looking for monogram that I can add names on them

Bcarberry - Are you planning to add the names (text) using Fusion 360, or another program? I personally find it much easier (and more versatility with choices of fonts) to use a program like Inkscape to add the names to the sign. Then save from Inkscape (or your cad drawing program of choice) and import the file to Fusion 360. They call it "Insert" to import a dxf or svg into the current sketch.

I tried this one out (didn't add any name) and it looks like it would cut fine. I'm no expert with Fusion 360 - and could not figure out how to reverse the cut order (cut inside paths first) so I just created two separate 2D profiles - one for inside paths and one for the outside path.

Let us know if you have any questions or are looking for a specific welcome sign or artwork to go with it and we are here to help.

David

inside cuts first.jpg

outside cut last.jpg

[adbuch]

sorry I'm looking for some

Bcarberry - no need to apologize. Most folks here would understand what you are looking for. And of course, since you are a contributing member - you can certainly use the search tool to look for welcome sign files or other types of signs. That's exactly what I did to find the ones I posted above. Let us know if you have any questions or need more information about any of these files (or how to edit and/or modify them) and we will be very happy to try to help you out.

By the way, I did send you a PM. Check your Private Messages Inbox.

Good luck!

David

[J-SIG]

looking for family named welcome signs?

Welcome to the site bcarberry!
I purchased 3 different "Monogram" styles from Etsy for about $2 each, they needed a little resizing and clean-up but was a great place to start!
Here's a couple I did quite a few months ago!

Jeff

IMG_E1483.JPG

IMG_E1481.JPG

[Joe Jones]

I tried this one out (didn't add any name) and it looks like it would cut fine. I'm no expert with Fusion 360 - and could not figure out how to reverse the cut order (cut inside paths first) so I just created two separate 2D profiles - one for inside paths and one for the outside path.

Let us know if you have any questions or are looking for a specific welcome sign or artwork to go with it and we are here to help.

David

inside cuts first.jpg

outside cut last.jpg

Do you actually make money selling signs you create with Fusion?

Joe

[adbuch]

yes I'm looking for monogram that I can add names on them

I missed the before where you "monogram". I was thinking about welcome signs. Here are some you can download free.

https://3axis.co/dxf/split-monogram-letters/

split monograms.jpg

[adbuch]

Here is an example I did using one of the free split monograms with the name added. This one will cut very nicely.
David

Adams Monogram.dxf

[adbuch]

looking for family named welcome signs?

Welcome to the site bcarberry!
I purchased 3 different "Monogram" styles from Etsy for about $2 each, they needed a little resizing and clean-up but was a great place to start!
Here's a couple I did quite a few months ago!

Jeff

Jeff - those look great! There are some real bargains to be had on Etsy.
David

[adbuch]

I tried this one out (didn't add any name) and it looks like it would cut fine. I'm no expert with Fusion 360 - and could not figure out how to reverse the cut order (cut inside paths first) so I just created two separate 2D profiles - one for inside paths and one for the outside path.

Let us know if you have any questions or are looking for a specific welcome sign or artwork to go with it and we are here to help.

David

inside cuts first.jpg

outside cut last.jpg

Do you actually make money selling signs you create with Fusion?

Joe

I'm not in the business of making and selling signs - created with Fusion 360 or otherwise.

[kicktillmonday]

Some great welcome signs, thanks David

[adbuch]

Some great welcome signs, thanks David