Need Santa Maria grill mechanism

[bscheu]

Does anyone happen to already have a Santa Maria grill ratchet gear crank mechanism already drawn up?

Such as the one in this link.
https://images.app.goo.gl/tH2UEfW1oQGoe5wu6

Thank you in advance
Bryan

[adbuch]

Brian - here is a set I did from auto trace for one of the guys on the Plasmacam Facebook group. He said he cut it and it worked well.
David

pawl gear set.dxf

pawl gear set.pcm

[bscheu]

Awesome! Thank you David for sharing and the super quick reply. I’ll give this a cut today.

[acourtjester]

Ok now don't forget to invite the PS folks when you do the test firing
Funny the other day watching "Man Fire Food" a guy had one of those but with a twist he also had a box shaped cover that would go up and down too.
This gave him a top cover to capture the smoke to have a sudo smoker with the grill.

[weldguy]

Super cool David, I could see that being useful at some point in the future for sure. Just did a quick edit to set the hole on center with the gear and will save for later use. Thanks David.

PawlSet.dxf

[Rockdog]

Great design thank you.