Car Show Wheel Stand

[Dawgonhawg]

Would anyone have something like this photo. If so what size material did you use? Your help will be appreciated.
Jim

IMG_20250320_130654.jpg

[ROKCRLER]

Jim,
Here is one ive been working on for jeep shows, these will be 14ga - 11ga.
Shouldnt need to be thicker.
These will be take down style for packaging.

BTW, those gold spokes bring back memories

Stand.JPG

[Joe Jones]

What do they do? Jack the wheels up and place them onto stands for car shows?

Joe

[adbuch]

Jim - here is one you might be able to use. Constructed from 11 ga. steel. You could scale the overall size and adjust material thickness to suit your needs.

David

car show stand.dxf

car show stand.dxf image 1.jpg

car show stand.dxf image 2.jpg

[zakscott22]

Jim,
Here is one ive been working on for jeep shows, these will be 14ga - 11ga.
Shouldnt need to be thicker.
These will be take down style for packaging.

BTW, those gold spokes bring back memories
Stand.JPG

id be interested in seeing how you end up doing the take down part. ive been looking to design something like this for shows we go to and usually stack 6-8 rigs but if we could get the first rig flexed on one of these would be awesome

[adbuch]

Not sure what Mo means by "take down". Maybe it folds, or uses a slot/tab arrangement. When you say "usually stack 6-8 rigs" - do you mean you stack up the stands so you can show off the chassis flex for an offroad vehicle?

David

[zakscott22]

Not sure what Mo means by "take down". Maybe it folds, or uses a slot/tab arrangement. When you say "usually stack 6-8 rigs" - do you mean you stack up the stands so you can show off the chassis flex for an offroad vehicle?

David

Yes, usually we have a group of us that go to shows together and show off flex. Ill see if i can find some of the pics and ill share them.

[adbuch]

Not sure what Mo means by "take down". Maybe it folds, or uses a slot/tab arrangement. When you say "usually stack 6-8 rigs" - do you mean you stack up the stands so you can show off the chassis flex for an offroad vehicle?

David

Yes, usually we have a group of us that go to shows together and show off flex. Ill see if i can find some of the pics and ill share them.

Thanks!

David

[zakscott22]

Here is one of the quick pics I found. This was before I got my jeep there.

FB_IMG_1743544894039.jpg

[adbuch]

Here is one of the quick pics I found. This was before I got my jeep there.

Thanks for the photo explanation. How do you get it up onto the stand? Or is that driven up a ramp on the one side?

David

[zakscott22]

I am looking at building a stand, will probably have to have a short ramp of some sort. For now we just drive up the other persons tire and the 1st guy doesnt get to flex his out.

[adbuch]

I am looking at building a stand, will probably have to have a short ramp of some sort. For now we just drive up the other persons tire and the 1st guy doesnt get to flex his out.

I guess the tires stick out enough from the fenders that you don't run the risk of damaging the other guy's fender.

David

[zakscott22]

I am looking at building a stand, will probably have to have a short ramp of some sort. For now we just drive up the other persons tire and the 1st guy doesnt get to flex his out.

I guess the tires stick out enough from the fenders that you don't run the risk of damaging the other guy's fender.

David

Been a few times we have gotten close and rubbed a tire against a fender or door. We all beat on them pretty hard and have some sort of damage to them so it's not a huge deal.

[adbuch]

I am looking at building a stand, will probably have to have a short ramp of some sort. For now we just drive up the other persons tire and the 1st guy doesnt get to flex his out.

I guess the tires stick out enough from the fenders that you don't run the risk of damaging the other guy's fender.

David

Been a few times we have gotten close and rubbed a tire against a fender or door. We all beat on them pretty hard and have some sort of damage to them so it's not a huge deal.

[ROKCRLER]

A buddy of mine started making and selling a nice version.
https://broachworx-fab.us/

FlexStandBWX.jpg

FlexStandBWX2.jpg

[adbuch]

A buddy of mine started making and selling a nice version.
https://broachworx-fab.us/

Looks like a very nice design.

David

[05Duramax]

Those look pretty sweet! Awesome looking ramp as well

[Jason@bc]

Now that's real slick, love the design.