PM 1250 swirl ring question

[Jeff M]

I hope there is still no such thing as a dumb question. I have a T80 hand torch mounted on my gantry. With fine tip consumables, do I use a 120925 or a 220327 swirl ring for the T80M ?

Thanks,
Jeff M

[jimcolt]

Jeff,

Use the standard swirl ring for all FineCut applications....part number 120925. The other swirl ring is for hand held cutting only, to improve edge starting arc transfer. Also, you will get best results if your use the 220404 Deflector shield...this shield extends a few thousandths beyond the nozzle...and will provide for better nozzle life when using the FineCut parts.

Best regards, Jim Colt

I hope there is still no such thing as a dumb question. I have a T80 hand torch mounted on my gantry. With fine tip consumables, do I use a 120925 or a 220327 swirl ring for the T80M ?

Thanks,
Jeff M

[Jeff M]

Mr. Jim Colt,

Thanks very much, Jim. I appreciate the extra info too.

Jeff M