I'm looking for a PlasmaCam owner either in or at best close to WI. My system is down, and I need a piece cut. I do have a ready pcm file that has been finalized and is ready to cut. Drop me a message, or email :neykok@yahoo.com as I check that more often than here..
Thanks in advance!!!
-
-
Weekly Free DXF Design
-
Download DXF/SVG
PlasmaCam Location
-
Neyko
- 1 Star Member
- Posts: 13
- Joined: Tue Sep 13, 2011 2:16 pm
- Location: South Milw / Bridgeview
- Contact:
PlasmaCam Location
"The secret of a good life is to have the right loyalties and hold them in the right scale of values".
PlasmaCam DHC2
PlasmaCam DHC2
-
tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1718
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: PlasmaCam Location
May want to contact this fella, met him at a recent Home Builders show where he had a booth.
My Metal Artworks
1727 NE Frontage Rd
Sturtevant, WI 53177
Phone: 262-886-6918
Fax: 262-886-9252
Email: sales@mymetalartworks.com
My Metal Artworks
1727 NE Frontage Rd
Sturtevant, WI 53177
Phone: 262-886-6918
Fax: 262-886-9252
Email: sales@mymetalartworks.com
Dennis
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
-
Neyko
- 1 Star Member
- Posts: 13
- Joined: Tue Sep 13, 2011 2:16 pm
- Location: South Milw / Bridgeview
- Contact:
Re: PlasmaCam Location
tnbndr
Thanks for the info, I'm in South Milw, and he is fairly close. If for some reason he can do the cut, do you use a PlasmaCam to do your art or other? if it's other I can convert this file to dxf... Will try my metal arts first. Thanks bro
Neyko
Thanks for the info, I'm in South Milw, and he is fairly close. If for some reason he can do the cut, do you use a PlasmaCam to do your art or other? if it's other I can convert this file to dxf... Will try my metal arts first. Thanks bro
Neyko
"The secret of a good life is to have the right loyalties and hold them in the right scale of values".
PlasmaCam DHC2
PlasmaCam DHC2
