dragon and scarab dxf

[luap676]

Hey everyone
New here... this is a great site... always nice to see people helping people without profit in mind?
I was wondering if someone could convert these 2 vectors to dxf file?
Thanks in advance?hopefully I can return the favor someday...

afd-8946.jpg

[TAP]

I had some funky things goin on while converting, let me know if it works please..

Tim
-------------------
I"m having software problems, maybe someone could do scarab or both,
Tim
-------------------Could be the -62 windchill 1 hour ago--------------

DRAGON.dxf

[luap676]

Hey Tim
THANKS!
I will try in the morning and let you know how it goes?
Paul

[MetalTorcher]

Do you need that exact scarab? For some reason I had a hard time getting a nice trace on it so I found an alternate for you. Needs cleaning up and modifying but it's a start. Hopefully this helps!

scarab beetle.dxf

[harrymorley]

thanks ..great files

[Copp3r]

Here's a slightly modified version of the Dragon. The member that posted the first DXF did a GREAT job.

A couple of the things I like to do for most projects is to round of the pointed ends to end users don't get cut (whether it's a grown man or a small child playing with the cutout).

I've also joined all of the pieces that were 'hanging free to the wind.'

Like I mentioned, the first rendition is great... this is just my mod off of it.

Cheers,

Copp3r / roger

(sorry - the site isn't allowing me to upload the DXF version. I'd tried 6+ times)

Styalized Dragon.pcm

[MetalTorcher]

Here's your file Copp3r in dxf.

Styalized Dragon.dxf

[TAP]

you guys do good,,

[luap676]

Hey Tim
Great help but the dragon didn't work as the lines aren't all connected so pieces would fall off
Thanks a lot for your help

Paul

[luap676]

Hey Jason
The scarab looks great but won't work I need it to be a cut out one piece
The scarab you used is great?

Thanks

Paul

[luap676]

Jason

The dragon looks great it looks like it will work
I will try it out and let you know

Thanks

Paul

[TAP]

Hey Paul, right from the get go that dragon was funky

Earlier I worked on it, or should say tried, it kept locking up the puter, noticed it had 698,472 nodes, tried to smooth it to lower the nodes, locked her up again,,, but its fun trying to figure this stuff out,,

Anyway Paul, hope it works out for you, It Is A Cool Dragon, but kinda spooky...

Tim

[TAP]

Hey Paul, right from the get go that dragon was funky

Earlier I worked on it, or should say tried, it kept locking up the puter, noticed it had 698,472 nodes, tried to smooth it to lower the nodes, locked her up again,,, but its fun trying to figure this stuff out,,

Anyway Paul, hope it works out for you, It Is A Cool Dragon, but kinda spooky...

Tim

----------------------------------------------------------------------------------------------------------------

Crazy Me, just seen my problem,,I had node precision/arc resolution in DE set to 5000, dont know who did that,
Wasnt Me

[MetalTorcher]

Mine is set to 100, what is yours at now?

[TAP]

Here's a slightly modified version of the Dragon. The member that posted the first DXF did a GREAT job.

A couple of the things I like to do for most projects is to round of the pointed ends to end users don't get cut (whether it's a grown man or a small child playing with the cutout).

I've also joined all of the pieces that were 'hanging free to the wind.'

Like I mentioned, the first rendition is great... this is just my mod off of it.

Cheers,

Copp3r / roger

(sorry - the site isn't allowing me to upload the DXF version. I'd tried 6+ times)

Styalized Dragon.pcm

I know what you mean about those pointed pieces, walked into one and left a dime size infected hole in my hip, took 3 months to heal, just imagine what that would do to some innocent little kids eye or any part of the body, hate to think about it.
Tim

[TAP]

Mine is set to 100, what is yours at now?

Hi Jason, I set it back to 100, I was just fooling around and trying different things and forgot to put it back,

Tim

I just updated to 4.22 also..

[TAP]

Paul, maybe you can try this one if needed..if you need anything changed, let us know...
Tim

Scarab.dxf

[luap676]

Hey Tim
Thanks for the scarab is it possible to get lines going the length of the body giving it more detail
lines actually holes

thanks again

Paul

[TAP]

Paul, hope this helps, it was quick draw,
If its not right paul just ask for some help, someone will get it done for you,,,

Have Fun,
Tim

Scarab 2.dxf

[luap676]

Hey Tim

I tried the dragon but only 3 small vectors came through and the rest were not there on my software

thanks for all your help

Paul

[Largemouthlou]

Thanks for the hard work gang

[TAP]

Paul, what exactly are you having trouble with..?
Maybe we'll have to call in some reinforcements..


Edit: Paul, I took a look at the dragon and YES, your right, not sure whats going on, put here's another to try..

Dragon 4.dxf

[luap676]

Tim,
I get a message when in my software that says ignoring unsuitable open vectors...
And 1 open vector is identified and is being ignored and there are 3 remaining vectors...

Thanks for you help
I appreciate it

Paul

[luap676]

Tim
By the way the scarab looks great and I think will work

thanks

Paul

[TAP]

Tim,
I get a message when in my software that says ignoring unsuitable open vectors...
And 1 open vector is identified and is being ignored and there are 3 remaining vectors...

Thanks for you help
I appreciate it

Paul

Paul, try the last file I sent> Dragon 4 < and see if that works, BTW, what program are you using.

Tim