What code is this? any help would be great.

[Automag]

G00 X4.65 Y-2.98
M07
G01 X-0.25 Y-0.02
G41
G01 X-0.04 Y-0.06
G01 X-0.03 Y-0.05
G01 X-0.04 Y-0.05
G01 X-0.05 Y-0.04
G01 X-0.06 Y-0.06
G01 X-0.07 Y-0.05
G01 X-0.07 Y-0.04
G01 X-0.07 Y-0.04
G01 X-0.09 Y-0.03
G01 X-0.09 Y-0.03
G01 X-0.09 Y-0.02
G01 X-0.09 Y-0.02
G01 X-0.10 Y-0.01
G01 X-0.09 Y0.00
G01 X-0.10 Y0.01
G01 X-0.09 Y0.01
G01 X-0.08 Y0.02
G01 X-0.08 Y0.02
G01 X-0.08 Y0.03
G01 X-0.07 Y0.04
G01 X-0.07 Y0.04
G01 X-0.06 Y0.05
G01 X-0.06 Y0.06
G01 X-0.05 Y0.06
G01 X-0.03 Y0.05
G01 X-0.03 Y0.06
G01 X-0.02 Y0.06
G01 X-0.02 Y0.07
G01 X0.00 Y0.06
G01 X0.01 Y0.07
G01 X0.01 Y0.06
G01 X0.02 Y0.06
G01 X0.03 Y0.08
G01 X0.04 Y0.06
G01 X0.05 Y0.07
G01 X0.06 Y0.05
G01 X0.06 Y0.06
G01 X0.07 Y0.04
G01 X0.07 Y0.05
G01 X0.07 Y0.03
G01 X0.09 Y0.04
G01 X0.09 Y0.03
G01 X0.09 Y0.02
G01 X0.10 Y0.01
G01 X0.09 Y0.01
G01 X0.09 Y0.01
G01 X0.10 Y-0.01
G01 X0.09 Y-0.01
G01 X0.08 Y-0.02
G01 X0.08 Y-0.02
G01 X0.08 Y-0.03
G01 X0.07 Y-0.04
G01 X0.07 Y-0.04
G01 X0.07 Y-0.05
G01 X0.06 Y-0.06
G01 X0.05 Y-0.06
G01 X0.83 Y0.07
G01 X-0.02 Y0.03
G01 X-0.03 Y0.04
G01 X-0.02 Y0.04
G01 X-0.03 Y0.03
G01 X-0.09 Y0.10
G01 X-0.10 Y0.08
G01 X-0.12 Y0.08
G01 X-0.12 Y0.06
G01 X-0.13 Y0.06
G01 X-0.13 Y0.04
G01 X-0.14 Y0.03
G01 X-0.14 Y0.03
G01 X-0.17 Y0.02
G01 X-0.17 Y0.00
G01 X-0.18 Y-0.01
G01 X-0.17 Y-0.01
G01 X-0.17 Y-0.03
G01 X-0.16 Y-0.03
G01 X-0.17 Y-0.05
G01 X-0.16 Y-0.06
G01 X-0.13 Y-0.06
G01 X-0.13 Y-0.07
G01 X-0.12 Y-0.08
G01 X-0.11 Y-0.08
G01 X-0.10 Y-0.09
G01 X-0.09 Y-0.10
G01 X-0.08 Y-0.11
G01 X-0.06 Y-0.12
G01 X-0.04 Y-0.09
G01 X-0.02 Y-0.10
G01 X-0.01 Y-0.10
G01 X0.00 Y-0.10
G01 X0.02 Y-0.09
G01 X0.04 Y-0.09
G01 X0.04 Y-0.09
G01 X0.06 Y-0.08
G01 X0.09 Y-0.10
G01 X0.10 Y-0.08
G01 X0.11 Y-0.07
G01 X0.12 Y-0.07
G01 X0.14 Y-0.05
G01 X0.13 Y-0.04
G01 X0.14 Y-0.04
G01 X0.14 Y-0.02
G01 X0.17 Y-0.02
G01 X0.17 Y0.00
G01 X0.17 Y0.00
G01 X0.17 Y0.02
G01 X0.17 Y0.02
G01 X0.17 Y0.04
G01 X0.17 Y0.05
G01 X0.16 Y0.06
G01 X0.13 Y0.05
G01 X0.13 Y0.07
G01 X0.12 Y0.07
G01 X0.11 Y0.09
G01 X0.10 Y0.09
G01 X0.09 Y0.09
G01 X0.08 Y0.11
G01 X0.07 Y0.12
G01 X0.03 Y0.09
G01 X0.02 Y0.09
G01 X0.02 Y0.10
G01 X-0.01 Y0.10
G01 X-2.00 Y-0.22
G01 X0.02 Y-0.28
G01 X1.12 Y0.11
G01 X0.04 Y-0.05
M08
G40
G00 X-0.59 Y-1.94
M07
G41
G03 X0.25 Y0.00 I0.13 J0.00
G03 X0.00 Y0.00 I-0.54 J0.00
G03 X-0.06 Y0.00 I-0.03 J0.00
M08
G40
G00 X2.01 Y-0.15
M07
G41
G01 X0.08 Y0.23
G01 X-0.13 Y0.56
G03 X-0.23 Y-1.05 I1.16 J-0.80
G02 X0.49 Y-0.06 I-3.31 J-28.00
G01 X-0.13 Y0.55
M08
G40
G00 X1.01 Y-1.92
M07
G41
G03 X-0.23 Y-0.10 I-0.11 J-0.05
G03 X0.44 Y-0.41 I0.71 J0.31
G01 X1.09 Y-0.44
G01 X-0.07 Y1.65
G03 X-1.74 Y0.31 I-5.86 J-27.58
G03 X0.28 Y-1.11 I4.75 J0.60
G03 X0.06 Y0.02 I0.03 J0.01
M08
G40
G00 X-6.67 Y0.70
M07
G41
G03 X0.14 Y0.16 I0.02 J0.12
G02 X-0.41 Y2.19 I9.21 J2.85
G02 X0.29 Y1.94 I3.56 J0.46
G02 X1.52 Y1.51 I2.74 J-1.23
G02 X2.28 Y0.42 I2.00 J-4.49
G02 X3.31 Y-3.63 I0.02 J-3.31
G02 X-0.13 Y-0.11 I-0.12 J0.01
G03 X-1.08 Y-0.36 I-0.13 J-1.41
G01 X0.35 Y-1.40
G02 X2.31 Y-0.44 I-4.10 J-27.90
G02 X-0.04 Y-0.29 I-0.02 J-0.14
G03 X-0.24 Y0.05 I-6.32 J-27.48
G01 X0.05 Y-1.68
G01 X0.32 Y-0.13
G02 X-0.10 Y-0.24 I-0.05 J-0.12
G03 X-1.56 Y0.63 I-11.58 J-26.66
G02 X-0.61 Y0.55 I0.57 J1.24
G02 X-0.30 Y1.28 I7.48 J2.44
G03 X-0.57 Y0.07 I-3.88 J-27.93
G01 X0.01 Y-0.21
G02 X-0.12 Y-0.71 I-1.25 J-0.15
G02 X-1.86 Y-0.71 I-1.41 J0.89
G02 X-1.57 Y0.89 I0.83 J3.29
G03 X-1.84 Y0.40 I-1.20 J-1.12
G03 X0.02 Y-0.06 I0.01 J-0.03
M08
G40
G00X-.46Y-2
M02

[beefy]

Looks like someone got angry with a pen then traced it

[Automag]

Any idea what code this is in? I dont care what it makes,I need to know the code?

[weldor2005]

Its generic G/M Code.

It is what most CNC machining equipment gets programmed with.

[Automag]

what program could i use to covert .dxf files to generic g/m code?

[weldor2005]

I know there are lots out there, master cam does it, if you have the upgraded plasmacam software you can export it.

[beefy]

Any idea what code this is in? I dont care what it makes,I need to know the code?

First of all YOU'RE WELCOME.

Secondly be a bit more specific with your question. A lot of members here would not realise you don't even recognise basic gcode when you see it. If you are at such a beginners level then let us know.

Thirdly try and be a bit more courtious and appreciative in your replies. No one has to go out of their way for your benefit.

[Automag]

oops! not trying to come off that way at all,i was running late and in a hurry. :-*. i am a beginner by the way.

[weldor2005]

I'm not going to defend anyone here, But Beefy is right that everyone is basically offering up free advice on most forums, and everyone likes to be respected.

Auto mag, don't get discouraged, we all start somewhere, and if you can handle the internet scene, Forums are a great learning experience from all types of people. Just the stupid nerdy ones with less than 10 practical years, all the way up to twice retired can make anything with their hands.

Hang in there, and of course, when asking questions, the best, fasted response will come when there is a thorough description of the problem you need solved.

[vmax549]

The code you post is a " Gcode" program that most machines use to control the machine.

The reason it looks the way it does is your controller is set wrong to run/view it properly. The IJ mode needs to be changed opposite of the way it is set up. OR you need to add Gcode to the start of the program to SET the IJ mode properly.

The options for IJ mode are Absolute (abs) or Incremental (inc).

To convert a DXF to Gcode you need a CAM program and a LOT more patience (;-). Cad Cam CNC has a very steep learning curve involved. Time, patience, energy and Friends on websites are your only friends in the adventure. Be careful how you use them.

Just a thought, (;-) TP