Hello All
I have a small fab and Blacksmith shop, I bought a 4x4 table from a smaller manufacturer so I could cut out my own parts. When I bought the table I had several problems with it. I don't want to go into the problems, but I gave him every chance to fix them. He finally fixed most of them, but he has left me without a THC, and he won't return email or text or call.
I need help with adding a THC. I'm not a computer guy but I can follow directions. I have a Gecko 540 controller. If anyone could point me in the right direction, I thank you.
-
-
Weekly Free DXF Design
-
Download DXF/SVG
Torch Height Control
-
Masons Forge
- 2 Star Member
- Posts: 99
- Joined: Fri Jul 05, 2013 11:18 pm
- Location: Concord NC
- Contact:
-
sodfarmer
- 2.5 Star Member
- Posts: 170
- Joined: Sun Dec 19, 2010 2:54 pm
- Location: Van Wert, Iowa
-
jimcolt
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Torch Height Control
You will have to supply us with more info. Make of your machine and plasma cutter. What software are you using, pictures of your cnc machine and the controls and z axis.
Jim Colt
Jim Colt
Masons Forge wrote:Hello All
I have a small fab and Blacksmith shop, I bought a 4x4 table from a smaller manufacturer so I could cut out my own parts. When I bought the table I had several problems with it. I don't want to go into the problems, but I gave him every chance to fix them. He finally fixed most of them, but he has left me without a THC, and he won't return email or text or call.
I need help with adding a THC. I'm not a computer guy but I can follow directions. I have a Gecko 540 controller. If anyone could point me in the right direction, I thank you.
-
bigjondrags
- 2 Star Member
- Posts: 54
- Joined: Sat Aug 31, 2013 1:40 pm
Re: Torch Height Control
Viper?
