Morning All,
New to forum talk Discussions.
We Have a Plasmacam DHC2 Worked fine for the last 5 years. Had a bad storm monday night and All our HAAS Cnc's are fine but now our PCam won't initialize, Controller blinks as usual on start up but that's all we get. Not sure what it could be. Ran diagnostics on controller and all seem good. Also Let it sit unplugged for an hour and overnight to reset the controller and no Luck. Gantry and Z axis everything moves nothings locked up. Going to try and find a new Parallel Port Cable in town this morning and try that but if that don't fix it we're stumped.
Anyone have a similar issue?
Any Help is greatly appreciated.
Thank you
-
-
Weekly Free DXF Design
-
Download DXF/SVG
Plasma Cam Won't Initialize Period
-
CaseyHFW
- 1/2 Star Member
- Posts: 1
- Joined: Tue Jun 30, 2020 4:27 pm
-
rdj357
- 4 Star Elite Contributing Member
- Posts: 1186
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: Plasma Cam Won't Initialize Period
Open the system setup tab under settings and click Detect Machine and see if it will initialize after it detects successfully.
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
