Im thinking I way under bid these but I want to see what you guys would've come in at?
The plates are 23"x29" 16gauge cr steel. The customer is bending the hooks up and painting. We just had to cut and grind them.
I came in at $28.00 each.
They ordered about 10 different plates with all different hooks and spacing/wording. Each design we cut 2-3. so about 30 plates total.
Thanks for your help,
Mike
Price Check. Display Hook Plates
- conz35
- 1.5 Star Member
- Posts: 48
- Joined: Mon Jan 07, 2013 4:54 pm
- Location: Yuma, Az and Davenport, Wa
- Contact:
Price Check. Display Hook Plates
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
"Knowledge is knowing that a tomato is a fruit, but Wisdom is knowing not to put it in a fruit salad."
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Price Check. Display Hook Plates
I think you got pretty close actually. I know others will add $10-25 for the overall handling charge for moving around that many sheets, but if you're table is big enough and you can nest full sheet cuts without having to babysit the job, then you probably did ok.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
- conz35
- 1.5 Star Member
- Posts: 48
- Joined: Mon Jan 07, 2013 4:54 pm
- Location: Yuma, Az and Davenport, Wa
- Contact:
Re: Price Check. Display Hook Plates
Thanks Capstone.
The part i probably messed up then was I didn't add anything for design time; which was over 4 hours to get all of them designed right with hook spacing, hook size.
Thanks again for your input,
mike
The part i probably messed up then was I didn't add anything for design time; which was over 4 hours to get all of them designed right with hook spacing, hook size.
Thanks again for your input,
mike
"Knowledge is knowing that a tomato is a fruit, but Wisdom is knowing not to put it in a fruit salad."
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Price Check. Display Hook Plates
If they were all the same then I would be around 25e each as well (roughly same as $) it fairly eats up time when they chop and change designs though.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery