4x4 welding table help

[bryancab]

have to say I have seen a lot of things but this is the best layed out well thought out I have ever seen

we need to start a go fund me just for your time

[hemichargersrt8]

Hello all, I have been asked for smaller squares, so here goes.
On a personal note, thank you all for the kind comments. To those that have sent monetary gifts, a really big thank you. To those who took the time to post pictures, I really appreciate the feed back!
Basically, I have put together two styles of squares. These can be clamped or bolted to the welding table. They also can be clamped or bolted together to created various combinations. I did not invent these squares, probably developed by the "Romans", I simply have looked across the internet and compiled the best ideas into two squares. As usual all of the parts have puzzle tabs for assembly.

[hemichargersrt8]

The first is the tri square, all pieces are cut from .25" mild steel and welded together. I have included a template that will help keep the pieces square to each other when welding. Bolt the template (I have colored the template yellow). Then position and clamp the parts around the template. Be sure to use just enough weld to form a solid assembly, but not so much as to warped the assembly from excessive heat. I would imagine that you can reuse the template as a square as well when the project is completed.

[hemichargersrt8]

The next square is built in the same way, all puzzle tabbed and has a welding assembly template included as well.

[steel 35]

Thanks so much

[Faulknerm]

Wow, that's awesome! Thanks again for sharing. I'm still willing to send a paypal gift! I pm'd you about it, but haven't got a response yet.

[AIRFLOWKID]

Thank you so much!

[Prioritywelding]

Nice work for sure.. Has anyone made this 4x4x1/4 or 4x6x1/4

[rdj357]

Thanks so very much for the share, great work and great design!!

[Bigstax]

Great work
great design
thank you

[Funbum]

Amazing!!! Thank you!!

[Prototypetom]

Simply awesome this is going to be my first build and I will document it I might modify the table structure to house my gas bottle and tig welder but apart from that I can't wait to get this cut

[Sampson Jones]

Thank You !!!!

[BlackDragon69]

This is awasome and somuch appreciated.!! Now just to find the time to do the build! I may have to move it up the 'To Do List"...
Wife will understand ??

[Pecanman]

Great stuff!! Thank You!!

[radicalrescue]

Wow, that's awesome! Thanks again for sharing. I'm still willing to send a paypal gift! I pm'd you about it, but haven't got a response yet.

we r still waiting

[stuk4x4]

Very nice stuff, it will be a while before I make a new table like this but I appreciate all the time and effort put into making and sharing these files. Thanks again
Walt

[Poh]

Man, Thank you for the awesome files!

[bryancab]

in torchmate cad how to you apply a offset to the object to increase or decrease the size for a different thickness material

[tylerd]

Awesome post! Can the table be cut in 1\4" also? Or would that mess up the tab\slot ratio? Either way thanks! I know what my first cuts on my new table will be!

[irish1122]

This is awesome stuff. Ive wanted a fixture table for years now. Just havent pulled the trigger on trying to design one myself. Thanks for the work.

[Uzaree]

Great work, I would offer a suggestion thought. I would make all your holes 16MM because it fits all the strong hand tools. Also, the 16 MM give enough room for the shoulder etc.

I build my tables with sides. I do use my laser for my tables though and I know Plasma isn’t as accurate.

[hemichargersrt8]

Thanks and yes, the new table plans I posted some time ago use 16mm (.63") holes.
http://plasmaspider.com/viewtopic.php?f=6&t=23989

[Uzaree]

ok, I must have missed that. Great work btw That's awesome that you're sharing these.

[ETCWeld]

I can't wait to build one of these! This one project made joining this site a must!
Thanks for all the info and incite