Gravity paint gun stand DXF design

[Scratch]

Before I draw one up, does anyone have a file they like for a HVLP gravity gun stand?

[adbuch]

I made one years ago by hand, but there are plenty of images here to draw inspiration from. Should be very simple to make.
David

https://www.google.com/search?source=un ... =615&dpr=1

paint gun stand.jpg

[tinspark]

None here, but I sure could have used one last summer when I was painting my new wrought iron fence.
Something that I could have clamped to my temporary plywood paint table on folding sawhorses so that I couldn't accidentally knocked it off and on the ground. Interested to see what you guys come up with. Might be worth making one here too

Edit: Found this one at Harbor Freight online website for $12.99
What I like about it is it can be clamped down, but the strainer funnel holder above the gun seems like it would be handy.
Might be worth just picking one up and call it a day!!
see attached link below
https://www.harborfreight.com/gravity-f ... 34958.html

Just noticed David shows it in his prior post above too.. LOL!!

[Scratch]

Can't make it into town to buy one, and need it today for a paint job, so I made this one out of 14 gauge scrap. Not entirely happy with it since it seems like the back piece needs to be a little stiffer, but it does work fine even with full paint cup. Maybe I'll revisit the design later. Anyways here's what I came up with this morning.

paint_gun_stand.CDR

paint_gun_stand.dxf

[plasmanewbie]

That's pretty awesome Scratch, thanks for sharing, this will definitely come in handy

[BearFab]

thanks for the file

[Jeepn2]

Just cut it and it works fine, thanks for the file!