Need help from the gurus with a collapsible fire pit

[Willdamnit]

Hey guys I'm working on a collapsible fire pit I have a photo right now I'll share the completed file with I'm done with it I've done more work to it since I took this photo. My question is I'm wanting it to fit on a 4x4 sheet any help would be great. Currently the image show is 24x24.Thanks Willdamit

received_1117687262970626.jpeg

[Willdamnit]

Here is the file

eagle flag firepit.dxf

[Joe Jones]

What exactly do you want to do with this file? I see tabs on one plate, but no slots for it. I see no hangers to hold them into place. The bottom plate is just a rectangle...

You need two sides and a bottom.

Joe

This is my edit on your design. Do as you wish.

JJ - eagle flag firepit.dxf

JJ - FIREPIT JPG.jpg

[Willdamnit]

What exactly do you want to do with this file? I see tabs on one plate, but no slots for it. I see no hangers to hold them into place. The bottom plate is just a rectangle...

You need two sides and a bottom.

Joe

This is my edit on your design. Do as you wish.

JJ - eagle flag firepit.dxf

JJ - FIREPIT JPG.jpg

Thanks you will have to do a YouTube video on how you did this. Thank you so much. I was trying to do a tab and slot

[plasmanewbie]

Wow Joe, that is a pretty awesome edit on the OP's pit! Nicely done Thanks to the OP for the original design

[tinspark]

Here it is with just the blank pit.
So you could easily add any design without deleting anything
I fits neatly in a 4'x4'sheet
Slots are 1/4", so I would either draw them bigger if you want 1/4" plate or drop the material thickness to 7 gauge (aka 3/16" plate).
I like the design.
Joe did all of the heavy lifting on the notches and clean-up.

round op fire pit pic.JPG

round top tabbed fire pit .1875 plate.dxf

round top tabbed fire pit .1875 plate.pcm

[Willdamnit]

Thanks guys I knew I came to right place for help

[Splinters&Sparx]

Wow awesome job Joe

[Zippo]

Nice